Tanning Bed Repair
Tanning Bed Repair in Ferndale, Michigan
Sun Systems and Service repairs tanning beds in Ferndale on-site, every make and model, and has since 1990. Ferndale is next door to our Metro Detroit base, so there is no shorter drive on our schedule. Call (248) 545-5577 any day from 9 to 6, give us the make, model and symptom, and you are talking to the technician who will show up.
Nine Mile and Woodward: small studios in old buildings
Ferndale is a small city with a big downtown. West 9 Mile from Woodward to Livernois is the walkable core, lined with 1920s brick storefronts that now hold bars, salons and studios, with more along Woodward between 8 Mile and the Pleasant Ridge line and in the smaller plazas on Hilton and Livernois. I-696 crosses the north end. The tanning and wellness studios here are mostly one-room or two-room operations run by the owner, and in a shop that size a dead bed is not an inconvenience, it is half the day's revenue.
Because Ferndale is so close, it rarely needs its own trip. It gets added to the start or end of an Oakland run, and if the phone diagnosis points to a ballast, a starter set or a fan, the part is already on the truck. For a one-bed studio that matters more than anything else we can offer.
Century-old wiring in a modern studio
Downtown Ferndale's buildings have been split, combined and rewired many times since the 1920s, and the result is unpredictable. A studio can have a brand new subpanel on one wall and a 1950s circuit feeding the outlet the bed is plugged into. When the room lights dip as the bed fires, or a breaker trips at the busiest hour, the wiring is the first suspect and the bed is the second. We meter the circuit under load, tell you which it is, and if it is the wiring we write down exactly what the electrician needs to do. Our electrical requirements guide covers the basics.
What we fix
- Bed will not turn on or will not start: power, timers, door and safety switches, control boards. Start with our troubleshooting checklist.
- Lamps dim, flickering or dead: lamp, starter or ballast, metered rather than guessed.
- Breaker tripping and electrical faults, including beds on old shared circuits.
- Overheating and shutdowns: fans, filters, ventilation and cooling in tight rooms.
- Timers and controls that drift, stick or fail.
- Lid shocks, hinges and struts on canopies that will not stay up.
- Acrylics that are cracked, hazed or yellowed.
- Relamping as a full set with the right lamps. See how often to relamp.
- Hybrid and red light beds: same electrical fundamentals, same tech. See red light equipment.
Brands and equipment we service
Every make and model, including Ergoline, ETS, KBL, Wolff, ProSun, SunStar, Montego Bay, Sunmaster, Sun Dash and Soltron, plus the older and discontinued beds small studios depend on. Lay-down beds, stand-ups, high-pressure beds, hybrid UV plus red light beds and dedicated red light beds, with spray booth service as well. We source tanning parts by request, including for beds the manufacturer no longer supports.
How a service call works
- Call (248) 545-5577. Make, model, what it is doing and where in Ferndale you are.
- Phone diagnosis. If it is a breaker, a timer setting or a door switch, we will tell you.
- Scheduled visit added to an Oakland run, with the common parts for your bed on the truck.
- Quote before work begins. One number. Our repair cost guide explains what drives it.
- Repair, test at full output, and a maintenance plan so the next call is a scheduled relamp. See our preventive maintenance guide.
Moves, installs and used equipment in Ferndale
Getting a bed through a narrow storefront door or up to a second-floor suite is a planned job, and we handle tanning bed installation and red light bed installation in Ferndale studios and in the bungalows off Hilton and Livernois, with the circuit sorted out first. Closing or upgrading a salon in Ferndale? Call about your equipment. We can tell you what is worth fixing and look over any used bed you are considering before you pay for it.
Nearby areas we serve
- Tanning Bed Repair in Royal Oak
- Tanning Bed Repair in Southfield
- Tanning Bed Repair in Warren
- Tanning Bed Repair in Dearborn
- Tanning Bed Repair in Metro Detroit
- Michigan Tanning Bed Repair, statewide
Get your bed back to work
Ferndale tanning bed repair from the technician himself. Every brand, parts on the truck, 7 days.
Call (248) 545-5577Frequently asked questions
I run a one-bed or two-bed studio in Ferndale. Do you take small jobs?
Yes. Most of the salons we have served since 1990 are owner-run, and Ferndale is full of small studios where one dead bed is half the business. You get the technician on the phone, a straight phone diagnosis and a quote before any work starts, whether you have one bed or ten.
My studio is in an old building on 9 Mile and the lights flicker when the bed runs. What is going on?
Downtown Ferndale is mostly 1920s brick, rewired in pieces over a century. When the room lights dip as the bed fires, the bed is sharing a circuit or the service is undersized for the load. We meter the circuit under load, tell you whether the bed or the wiring is at fault, and write down what the electrician needs if it is the wiring.
Can you get a bed into or out of a narrow Ferndale storefront?
Yes. Narrow doors, back-alley entries and upstairs suites are normal downtown. We measure first, break the bed down as far as that model allows, and reassemble and test it in place. Moving a bed is a planned job, not a guess.
Which areas around Ferndale do you serve?
Pleasant Ridge, Hazel Park, Huntington Woods, Royal Oak, Berkley and Madison Heights on the Oakland side, and the Detroit neighborhoods just across 8 Mile.