Tanning Bed Repair in Ann Arbor, Michigan

Sun Systems and Service repairs tanning beds in Ann Arbor and across Washtenaw County, on-site, for every make and model. We are based in Metro Detroit and have served Michigan salons since 1990, and Ann Arbor has been part of the territory for as long as there have been salons on Washtenaw Avenue. Call (248) 545-5577 any day from 9 to 6 and you reach the technician, not a directory.

Washtenaw Avenue to State Street: salons on the student calendar

Ann Arbor's salons sit on its arterials. Washtenaw Avenue from the edge of campus out through Pittsfield Township to Ypsilanti is the longest commercial strip in the county, with Carpenter Road crossing it near the mall. State Street south of I-94 around Briarwood, Stadium Boulevard, Packard and Plymouth Road on the north side carry the rest, and Jackson Road leads west toward Dexter and Chelsea. The University of Michigan and Eastern Michigan in Ypsilanti set the rhythm. Demand spikes before spring break and again before graduation and summer, which is exactly when a dead bed costs the most.

From Metro Detroit, Ann Arbor is about 45 minutes to an hour by M-14 or I-94 depending on where the truck starts the day. We group Washtenaw County calls with west Wayne County stops in Plymouth, Canton and Livonia and run them together, so an Ann Arbor salon is not waiting on a dedicated trip. Phone diagnosis comes first. If it points to a ballast, a starter set or a fan, the part rides out with us.

Old downtown, newer strips, one electrical question

Downtown Ann Arbor and the campus edge are nineteenth and early twentieth century buildings, split and rewired many times. The Washtenaw and Carpenter corridor is 1970s through 1990s plaza stock. Pittsfield Township is newer still. The question is the same everywhere. Is the bed on a circuit that can carry it? Breakers that trip at the evening rush and ballasts that fail young point at the wiring first, and we meter the circuit under load before we replace anything. Our electrical requirements guide explains what to hand your electrician.

Bed down today? Start with a video session

Ann Arbor is close enough for regular on-site work, but if the bed is down on a Saturday in March you do not want to wait for the next Washtenaw run. Book a video session with Stan now. He walks through the bed with you on your phone, you know the same day what failed and which part fixes it, and if it needs the truck, the truck follows.

What we fix

• Bed will not turn on or will not start: power, timers, door and safety switches, control boards. Start with our troubleshooting checklist.
• Lamps dim, flickering or dead: lamp, starter or ballast, metered rather than guessed.
• Breaker tripping and electrical faults, including beds on shared or undersized circuits.
• Overheating and shutdowns: fans, filters, ventilation and cooling.
• Timers and controls that drift, stick or fail.
• Lid shocks, hinges and struts on canopies that will not stay up.
• Acrylics that are cracked, hazed or yellowed.
• Relamping as a full set with the right lamps. See how often to relamp.
• Hybrid and red light beds: same electrical fundamentals, same tech. See red light equipment.

Brands and equipment we service

Every make and model, including Ergoline, ETS, KBL, Wolff, ProSun, SunStar, Montego Bay, Sunmaster, Sun Dash and Soltron, plus older and discontinued beds. Lay-down beds, stand-ups, high-pressure beds, hybrid UV plus red light beds and dedicated red light beds, with spray booth service as well. We supply tanning parts by request and can ship them to Ann Arbor between visits.

How a service call works

1. Call (248) 545-5577. Make, model, what it is doing and where in Washtenaw County you are.
2. Phone or video diagnosis. If it is a breaker, a timer setting or a door switch, we will tell you.
3. Scheduled visit on a Washtenaw and west Wayne run, with the common parts for your bed on the truck.
4. Quote before work begins. One number. Our repair cost guide explains what drives it.
5. Repair, test at full output, and a maintenance plan timed to the campus calendar so relamps happen before the rush. See our preventive maintenance guide.

Installs, home beds and used equipment in Ann Arbor

We install and relocate tanning beds and red light beds for Ann Arbor salons and homes, with the circuit checked before the bed goes in. Closing or upgrading a salon in Ann Arbor? Call about your equipment. We can tell you what is worth fixing and look over any used bed you are considering, by video, before you pay for it.

Nearby areas we serve

• Tanning Bed Repair in Metro Detroit
• Tanning Bed Repair in Dearborn
• Tanning Bed Repair in Southfield
• Tanning Bed Repair in Lansing
• Michigan Tanning Bed Repair, statewide