Tanning Bed Repair
Tanning Bed Repair in Troy, Michigan
Sun Systems and Service repairs tanning beds in Troy on-site, every make and model, and has since 1990. Troy is a straight shot up I-75 from our Metro Detroit base, so it sits on our regular Oakland County route. Call (248) 545-5577 any day from 9 to 6, tell us the make, model and what the bed is doing, and you are talking to the technician who will fix it.
Big Beaver to Rochester Road: the beds that run hardest
Troy is a retail and office city, and its salons sit where the traffic is. Big Beaver Road near Somerset and I-75. Rochester Road from Maple north to Long Lake and Square Lake. John R along the Madison Heights line. Crooks and Livernois through the middle of the city. Those plazas draw from Troy itself and from Rochester Hills, Birmingham, Bloomfield Hills and Sterling Heights next door, which means the beds book solid and run back to back. Hard-run beds wear out ballasts, starters, fans and acrylics on a faster clock than a quiet neighborhood shop does.
Scheduling for Troy is simple. Oakland County calls are grouped into the same run, and Troy is on the way to Rochester Hills and Auburn Hills, so a Big Beaver salon fits in with the rest of the loop. If the phone diagnosis points to a ballast or a lamp set, it is on the truck when we arrive.
Newer buildings, long circuit runs
Most of Troy was built out between the 1970s and the 1990s, so the panels are generally newer and larger than what we see in the older inner suburbs. The problem in Troy is less often a tired panel and more often distance and sharing. In a big multi-tenant plaza the electrical room can be a long way from the salon suite, and a bed at the end of a long run on a shared circuit sees lower voltage than its nameplate expects. Lamps dim when the next bed starts, ballasts run hot, and the bed looks like it is failing when the wiring is the issue. We meter the circuit under load before we replace anything. Our electrical requirements guide covers what your electrician needs to see.
What we fix
- Bed will not turn on or will not start: power, timers, door and safety switches, control boards. Start with our troubleshooting checklist.
- Lamps dim, flickering or dead: lamp, starter or ballast, tested rather than guessed.
- Breaker tripping and electrical faults, including beds on long or shared runs.
- Overheating and mid-session shutdowns: fans, filters, ventilation and room airflow.
- Timers and controls that drift, stick or fail.
- Lid shocks, hinges and struts on canopies that drop.
- Acrylics that are cracked, hazed or yellowed.
- Relamping as a full set with the correct lamps. See how often to relamp.
- Hybrid and red light beds: LED arrays, controllers, fans and acrylics. See red light equipment.
Brands and equipment we service
Every make and model, including Ergoline, ETS, KBL, Wolff, ProSun, SunStar, Montego Bay, Sunmaster, Sun Dash and Soltron, plus older and discontinued beds. Lay-down beds, stand-ups, high-pressure beds, hybrid UV plus red light beds and dedicated red light beds, with spray booth service as well. We source tanning parts by request, including for beds the manufacturer no longer supports.
How a service call works
- Call (248) 545-5577. Make, model, what it is doing and where in Troy you are.
- Phone diagnosis. If it is a breaker, a timer setting or a door switch, we will tell you.
- Scheduled visit on an Oakland County run, with the common parts for your bed on the truck.
- Quote before work begins. One number. Our repair cost guide explains what drives it.
- Repair, test at full output, and a maintenance plan so busy Troy beds get relamped on schedule instead of failing on a Saturday. See our preventive maintenance guide.
Installs, home beds and used equipment in Troy
Troy has a lot of home beds in basements and spare rooms, and the same technician who services salon equipment handles tanning bed installation and red light bed installation in Troy homes, with the dedicated circuit coordinated before the bed arrives. Closing or upgrading a salon in Troy? Call about your equipment. We can tell you what is worth fixing and look over any used bed you are considering before money changes hands.
Nearby areas we serve
- Tanning Bed Repair in Royal Oak
- Tanning Bed Repair in Sterling Heights
- Tanning Bed Repair in Southfield
- Tanning Bed Repair in Clinton Township
- Tanning Bed Repair in Metro Detroit
- Michigan Tanning Bed Repair, statewide
Get your bed back to work
Troy tanning bed repair from the technician himself. Every brand, parts on the truck, 7 days.
Call (248) 545-5577Frequently asked questions
Do you cover all of Troy, including the Rochester Road and John R corridors?
Yes. Big Beaver, Rochester Road, John R, Maple, Crooks, Livernois and Long Lake are all part of our regular Oakland County route, and Troy is a short run up I-75 from our Metro Detroit base. Call (248) 545-5577 with the make, model and symptom and we will put you on the schedule.
A bed in my Troy salon overheats and shuts down mid-session. Is it the bed or the room?
Usually a bit of both. High-traffic beds in Troy plazas run back to back, and once a filter clogs or a fan slows, the bed cannot shed heat fast enough and the thermal cutout does its job. We check fans, filters and airflow on the bed, then look at how the room itself vents, because a bed in a closed room with no return air will keep tripping no matter how many fans you replace.
Do you service home tanning beds in Troy subdivisions?
Yes. Troy has a lot of home beds in basements and spare rooms, and we repair, relamp, install and relocate them. Red light beds and hybrid units as well. One number for the life of the bed.
Which cities around Troy do you serve?
Rochester Hills, Rochester, Birmingham, Bloomfield Hills, Clawson, Auburn Hills and Madison Heights in Oakland County, and Sterling Heights right across Dequindre in Macomb County.