Tanning Bed Repair
Tanning Bed Repair in Flint, Michigan
Sun Systems and Service repairs tanning beds in Flint and across Genesee County, on-site, for every make and model. We are based in Metro Detroit, we have served Michigan salons since 1990, and Flint is a straight hour up I-75 that we have been driving for most of that time. Call (248) 545-5577 any day from 9 to 6 and you reach the technician, not a directory.
Miller Road to Dort Highway: Genesee County salons an hour up I-75
The Flint area's salons sit in a ring around the city as much as in it. The Miller Road and Linden Road district in Flint Township is the county's main retail corridor, boxed in by I-75, I-69 and Corunna Road. Dort Highway, which is M-54, runs the east side of the city with older plazas and converted buildings. Grand Blanc has its own strip along Saginaw Street and Hill Road. Burton, Flushing, Davison, Swartz Creek and Fenton each carry a handful of neighborhood shops. Fenton sits on US-23, which makes it the first stop heading north from the metro, and Lapeer sits east along I-69.
We schedule the I-75 corridor as its own run. Genesee County calls get grouped with Lapeer, Saginaw, Bay City and Midland stops so the truck covers the whole stretch in a day instead of making one trip per salon. Phone diagnosis comes first. If it points to a ballast, a starter set or a fan, that part rides up with us, and if it points to something unusual, we order it before the run rather than after.
Second-life buildings and the panels that come with them
A lot of Flint-area salons occupy space built for something else. A former video store on Dort Highway, a former bank branch in Burton, a plaza suite in Flint Township that has been three different businesses since 1985. Each one inherited a panel sized for the previous tenant, and tanning beds pull more than most of those tenants ever did. When a Genesee County salon calls about a breaker that trips at the rush or a ballast that failed young, we meter the circuit under load before we blame the bed. Our electrical requirements guide covers the basics.
Bed down today? Start with a video session
An hour is not far, but it is far enough that you do not want to wait for the next I-75 run if a bed is dark on a busy weekend. Book a video session with Stan now. He walks through the bed with you on your phone, you know the same day what failed and which part fixes it, and if it needs the truck, the truck follows.
What we fix
- Bed will not turn on or will not start: power, timers, door and safety switches, control boards. Start with our troubleshooting checklist.
- Lamps dim, flickering or dead: lamp, starter or ballast, metered rather than guessed.
- Breaker tripping and electrical faults, including beds on inherited circuits.
- Overheating and shutdowns: fans, filters, ventilation and cooling.
- Timers and controls that drift, stick or fail.
- Lid shocks, hinges and struts on canopies that will not stay up.
- Acrylics that are cracked, hazed or yellowed.
- Relamping as a full set with the right lamps. See how often to relamp.
- Hybrid and red light beds: same electrical fundamentals, same tech. See red light equipment.
Brands and equipment we service
Every make and model, including Ergoline, ETS, KBL, Wolff, ProSun, SunStar, Montego Bay, Sunmaster, Sun Dash and Soltron, plus the older and discontinued beds that are common in Genesee County shops. Lay-down beds, stand-ups, high-pressure beds, hybrid UV plus red light beds and dedicated red light beds, with spray booth service as well. We supply tanning parts by request and can ship them to Flint between runs.
How a service call works
- Call (248) 545-5577. Make, model, what it is doing and where in Genesee County you are.
- Phone or video diagnosis. If it is a breaker, a timer setting or a door switch, we will tell you.
- Scheduled visit on the I-75 run, with the common parts for your bed on the truck.
- Quote before work begins. One number. Our repair cost guide explains what drives it.
- Repair, test at full output, and a maintenance plan so relamps line up with the next run instead of becoming emergencies. See our preventive maintenance guide.
Installs, home beds and used equipment in Flint
We install and relocate tanning beds and red light beds for Genesee County salons and homes, with the circuit checked before the bed goes in. Closing or upgrading a salon in Flint? Call about your equipment. We can tell you what is worth fixing, what it takes to move beds to a new building, and look over any used bed you are considering, by video, before you pay for it.
Nearby areas we serve
- Tanning Bed Repair in Lansing
- Tanning Bed Repair in Troy
- Tanning Bed Repair in Metro Detroit
- Tanning Bed Repair in Northern Michigan
- Michigan Tanning Bed Repair, statewide
Get your bed back to work
Flint tanning bed repair from the technician himself. Every brand, on-site or on video, 7 days.
Call (248) 545-5577Frequently asked questions
How far is Flint for you, and how does scheduling work?
Flint is about an hour up I-75 from our Metro Detroit base. We schedule the I-75 corridor as its own run, grouping Genesee County calls with Lapeer, Saginaw and Bay City stops so the truck covers the whole stretch in a day. Call (248) 545-5577, we diagnose by phone first, and the common parts for your bed ride up with us.
Do you cover Grand Blanc, Burton, Flushing, Davison and Fenton?
Yes. All of Genesee County rides the same run: Flint Township and the Miller Road district, Grand Blanc, Burton, Flushing, Davison, Swartz Creek, Fenton, Mount Morris and Clio. Fenton sits right on US-23, so it is often the first stop heading north.
My bed is down today. What is the fastest way to get help in Flint?
Book a video session with Stan. You show him the bed on your phone, he walks through it with you, and you know the same day what failed and which part fixes it. If it is something you can handle, you are back up without waiting for the truck. If it needs the truck, the truck follows, and the session is credited toward the on-site visit.
Do you go north of Flint to Saginaw and Bay City?
Yes. Saginaw, Bay City and Midland are scheduled on the same I-75 run as Flint, and Owosso is covered along M-21. Call with your city and we will tell you when the next run is going through.